When selecting heat-exchanger tubing, the word copper is not enough to define a material. A phosphorus-deoxidized copper tube used in HVAC service and a copper–nickel tube selected for seawater have different compositions, corrosion behavior, mechanical characteristics and procurement requirements. Selection must start with the fluid, temperature, operating conditions and applicable equipment standard—not just the thermal conductivity of pure copper.
Three alloy designations engineers should know
| Designation | Material family | Typical engineering context |
|---|---|---|
| UNS C12200 | Phosphorus-deoxidized copper (Cu-DHP) | Building-services tubing, refrigeration and selected condenser/heat-exchanger applications, subject to correct tube specification |
| UNS C70600 | Approximately 90/10 copper–nickel, with controlled iron and manganese additions | Marine service, seawater piping and heat exchangers where the specified water conditions support its use |
| UNS C71500 | Approximately 70/30 copper–nickel, with controlled minor additions | Demanding marine or process-water heat-exchanger service evaluated for corrosion and operating conditions |
These are broad application examples, not automatic approvals for any heat exchanger. The final grade, temper, thickness, joining method and standard must be specified for the actual equipment.
C12200: why the phosphorus matters
The Copper Development Association classifies C12200 as phosphorus-deoxidized, high-residual-phosphorus copper, often designated Cu-DHP. Its typical specification requires at least 99.9% copper including silver, with phosphorus in the 0.015–0.040% range. The phosphorus is significant because it deoxidizes the metal, affecting fabrication suitability; the product’s final properties still depend on temper and manufacture.
The Copper Development Association’s tube standards guide identifies ASTM B88 seamless water tube in Types K, L and M. Those type letters identify different wall-thickness systems, not three different copper alloys. Other specifications, such as ASTM B111/B111M, cover seamless condenser tubes and ferrule stock. Selecting a water-tube standard by habit for a condenser is not a substitute for checking the equipment design requirements.
C70600 and C71500: copper–nickel for water-side durability
In the marine sector, copper–nickel alloys are valued for their performance in specified seawater conditions, including their ability to develop protective surface films. The Copper Development Association’s desalination guidance lists C70600 as nominal 90/10 Cu–Ni and C71500 as nominal 70/30 Cu–Ni, and makes clear that the choice varies by corrosion conditions and cost.
Higher nickel content does not mean C71500 is automatically the optimum choice for every water system. Flow, temperature, solids, sulfides, chlorination, downtime and commissioning history can all influence performance. Alloys that perform well in clean, flowing seawater may face different risks in polluted or stagnant water. An engineering evaluation must also consider compatible tubesheets, waterboxes and joining procedures.
How to compare heat-exchanger tube options
- Define the medium: freshwater, treated closed-loop water, seawater, brine or a mixed process fluid; obtain actual chemistry where possible.
- Determine thermal performance: evaluate overall heat-transfer resistance, including fouling and wall thickness, rather than ranking solely by bulk-metal conductivity.
- Check pressure and temperature: design temperature, wall thickness, corrosion allowance where relevant and mechanical strength must work together.
- Assess erosion-corrosion risks: inlet turbulence, debris, flow disturbances and localized high velocities can dominate tube life.
- Consider shutdown behavior: stagnant, sediment-containing or poorly controlled water may be more harmful than normal flowing conditions.
- Review tube-to-tubesheet compatibility: expansion, welding/brazing procedures, galvanic effects and maintenance requirements should be assessed together.
- Specify proof of conformity: order the correct UNS designation, product standard, dimensions, temper, inspection certificate and test requirements.
Common specification mistakes
Confusing pure copper with copper–nickel: a generic line item such as “copper tube” provides insufficient information for seawater duty. Using conductivity as the only criterion: a highly conductive material may still be unsuitable if its water-side corrosion or fouling performance is poor. Ignoring alloy condition: mechanical strength and fabrication behavior depend on temper and processing. Assuming all water services are interchangeable: building HVAC water, desalination brine and open marine circuits involve fundamentally different operating environments.
Procurement and inspection checklist
Before ordering, confirm the design code, governing product specification, alloy UNS number, tube dimensions and tolerance, temper, surface and cleanliness requirements, hydrostatic or other testing, documentation and any project-specific witness points. On receipt, verify identity, markings and certificate traceability. Material acceptance should be tied to the purchase order rather than based solely on the supplier’s generic catalog.
Explore related Element Folio references: copper properties, copper versus aluminum, thermal conductivity and the copper alloys and manufacturers library.
Technical references
- Copper Development Association — UNS C12200 alloy profile.
- Copper and copper-alloy tube and pipe standards.
- Copper–nickel alloys in desalination systems.
- Copper–nickel tubing, waterboxes and piping in desalination plants.
Scope note: product standards and equipment specifications take precedence over general material-selection advice. No alloy is suitable for every water chemistry or operating condition.